PPTP client setup on TP-Link 841N/DD-WRT

Written by

Leic

in

Config:

TAB:    Services/VPN

         PPTP Client Options           =            Enable

         Server IP or DNS Name      =            72.20.26.247      ( VPNReactor )

        Remote Subnet                  =            10.87.248.0

        Remote Subnet Mask        =            255.255.255.0

        MPPE Encryption              =             mppe required,no40,no56,stateless

        MTU                                =             1450  ( Default )

       MRU                                 =             1450  ( Default )

       NAT                                =              Enable

       User Name                     =              zhenglei

       Password                       =              XXXYYYZZZ

 

TAB:    Security/VPNPassThrough

      PPTP PassThrough         =              Enable

 

Save Config & Reboot

 

Testing config:

TAB:    Administration/Commands/ifconfig

          Administration/Commands/ping 10.87.248.1

 http://code.google.com/p/autoddvpn/wiki/HOWTO

http://code.google.com/p/autoddvpn/wiki/CustomFirmware

http://code.google.com/p/autoddvpn/wiki/DNSMasq

http://code.google.com/p/autoddvpn/wiki/DEBUG

 http://www.robpeck.com/2010/05/dd-wrt-hacks-part-1-setting-up-a-pptp-vpn-endpoint/

http://www.dd-wrt.com/wiki/index.php/Static_PPTP_VPN_Client

http://www.astro.ff.vu.lt/~viktoras/toplanet/Iptables_command.htm